Binks

Binks · Spray guns & tips

Trophy spray guns

Binks' flagship manual air spray guns, built in full-size and touch-up sizes for pressure, siphon and gravity feed.

• HVLP, LVMP (Trans-Tech) and conventional air caps
• Wide choice of fluid nozzle and needle sizes

Binks · Spray guns & tips

Trophy automatic spray guns

Automatic version of the Trophy air spray gun for reciprocators, robots and fixed-gun lines.

• HVLP, LVMP and conventional atomization
• Shares Trophy nozzles and air caps

Binks · Spray guns & tips

Trophy AA1600 & AA4400 air-assisted airless guns

Manual air-assisted airless spray guns rated to 1,600 or 4,400 psi, built on the Trophy handle.

• Two pressure ratings: AA1600 and AA4400
• Flat-tip and twist-tip configurations

Binks · Spray guns & tips

DVX manual spray guns

Binks' newest air spray hand guns, offered in pressure-feed and gravity-feed versions with redesigned fluid body and air caps.

• Pressure (P1–P3) and gravity (G1–G2) air caps
• Quick-release air cap retaining ring

Binks · Spray guns & tips

DVX automatic spray guns

Automatic counterpart to the DVX hand gun for low-pressure air spray on automated finishing lines.

• Fixed or ratchet back end
• Lever or screw manifold options

Binks · Spray guns & tips

Model 2100 spray guns

Rugged general-purpose manual air spray gun with stainless fluid passages, suited to conventional and high-solids coatings.

• Stainless steel fluid passages
• Air control valve in the handle

Binks · Spray guns & tips

Airless 75 spray guns

Manual airless spray gun with a forged aluminum body rated to 7,500 psi.

• Rated to 7,500 psi (517 bar)
• Wide stainless fluid passages for heavy coatings

Binks · Spray guns & tips

AG364 airless automatic guns

Automatic airless spray gun aimed at wood and similar finishing lines, available dead-head or with a recirculating manifold.

• Dead-head or recirculation manifold
• Indexing tip holder

Binks · Spray guns & tips

Century FRP spray guns

External-mix gel coat, resin and chopper guns for fiberglass-reinforced polymer (composites) work.

• Gel coat, resin and chopper versions
• Low-emission (LEL) laminator options

Binks · Pumps & circulation

Maple piston pumps

Air-operated horizontal piston pumps for paint circulation and supply in automotive and general industrial systems.

• Several displacement and ratio sizes
• Horizontal piston design

Binks · Pumps & circulation

Smart electric circulation pumps

Electric, digitally controlled circulation pumps (E2/E4/EV series) for central paint systems.

• Digitally controlled AC motor drive
• Low-pulsation reciprocating fluid section

Binks · Pumps & circulation

MX pumps & spray packages

Air-driven piston pumps sold bare or as wall, cart and tripod spray packages for air-assisted airless, airless and sealant work.

• Magnetic detent for quick, low-pulsation changeover
• Bare pumps or complete packages

Binks · Pumps & circulation

Gemini II diaphragm pumps

Air-operated double-diaphragm pumps for spraying, transferring or circulating coatings, sold bare or in pail, drum and wall packages.

• Aluminum or stainless steel wetted parts
• Pail, drum and wall-mount packages

Binks · Pumps & circulation

DX70 diaphragm pumps

Compact 1:1 air-operated diaphragm pump for one- or two-gun applications, also sold as complete spray packages.

• Pail, cart, tripod and wall mounts
• Quick color change and refill

Binks · Pumps & circulation

DX200 diaphragm pumps

High-flow double-diaphragm pumps (1:1 and 3:1) for circulating or directly supplying paint to spray guns.

• Aluminum or stainless steel versions
• Regulated, non-regulated and surge-chamber models

Binks · Pumps & circulation

Pogo Plus pumps

Two-ball, double-acting piston pumps for low-pressure, high-volume transfer of low to medium viscosity fluids.

• 4:1 ratio
• Double-acting two-ball design

Binks · Mixing & proportioning

Century FRP systems

Gel coat, chop and wet-out systems for composites, built around the Century piston pump on wall, cart or mast-and-boom mounts.

• 17:1 and 6.5:1 Century pumps
• Gel coat, chopper and wet-out setups

Binks · Mixing & proportioning

IntelliFlow RCS3 2K proportioners

Electronic two-component dosing and mixing system with closed-loop flow control for liquid finishing lines.

• Gear-metered resin and hardener
• EtherNet/IP connectivity

Binks · Mixing & proportioning

Color change valve stacks

Modular color change valve stacks for switching paint colors to automatic applicators.

• High- and low-pressure valve stacks
• 1 to 31 valve configurations

Binks · Tanks, agitators & lifts

Pressure feed tanks

Galvanized and stainless steel pressure feed tanks from 2 to 60 gallons for supplying coating to spray guns.

• Galvanized or stainless steel
• Non-agitated, direct-drive or gear-reduced agitation

Binks · Tanks, agitators & lifts

Premium elevator systems

Pneumatic drum and pail elevators that lift a pump and agitator in and out of 25 L to 250 L containers.

• Configured with DX200 pumps and agitators
• Left- or right-hand controls

Binks · Tanks, agitators & lifts

Rotary piston air-driven agitators

Air-motor agitator drives with tachometer, in bung, clamp, tote, tank and sanitary mounts.

• 1/8 to 1 HP rotary piston air motors
• Built-in tachometer

Binks · Tanks, agitators & lifts

Drum & pail agitators

Air-driven and electric agitators that keep paint solids in suspension in pails, drums and tanks.

• For 5-gallon pails, 55-gallon drums and tanks
• Direct-drive and gear-drive models

Binks · Regulators, filters & valves

Fluid pressure regulators

Fluid pressure and back-pressure regulators that hold a steady pressure to spray guns and circulating systems.

• Low, medium and high pressure ranges
• Stainless steel versions for waterborne

Binks · Regulators, filters & valves

Low-shear back pressure regulators

Large-seat back pressure regulators that control circulating paint line pressure while limiting shear on the paint.

• Large valve seat area to reduce shear
• Manual or pilot control

Binks · Regulators, filters & valves

Surge eliminators

Surge chambers that smooth the pressure drop at piston-pump changeover in paint circulation systems.

• Standard and active-flush versions
• Sanitary and NPT connections

Binks · Sealants & adhesives

F200 & F400 flow guns

Lightweight manual flow guns for dispensing mastics, sealants and adhesives.

• F200 and F400 pressure versions
• Choice of nozzle adapter threads

Binks · Sealants & adhesives

Ram units

Single- and dual-post ram supply units that push medium and high viscosity sealants and adhesives from pails and drums.

• 20 L to 205 L container sizes
• Paired with MX pumps in many ratios

Binks · Air Accessories

Spray Gun Extensions

• Conventional - circular, forward, 45 degree and 90 degree
• HVLP Guns
• Airless High Pressure

Binks · Fluid Management

GEMS 2K Mixing System