Paint-kitchen and line equipment: agitators, drum and pail lifts, brush tip cleaners, gun flush boxes, color change stacks and dispense pumps.
Lines we supply, with every model and service part searchable in our parts catalog. Add any to your RFQ list — we'll confirm the right model, availability and pricing.
Autoquip · Mixing & proportioning
Cartridge-style stainless poppet valves that serve as the on/off element in Autoquip color stacks, dump valves and solvent manifolds.
Autoquip · Mixing & proportioning
Stainless valve stacks and manifolds that bring several paint colors plus solvent and air into one outlet for color change.
Autoquip · Mixing & proportioning
Configurable color-change stacks that pair color (P) and dump (D) valves with air and/or solvent flush valves in one modular assembly.
Autoquip · Mixing & proportioning
Booth-mounted pneumatic control box that lets a manual painter pick a color and run the solvent and air flush sequence.
Autoquip · Mixing & proportioning
Color valve blocks for piggable circulation systems, where a foam pig pushes coating out of the line for recovery before the line is flushed.
Autoquip · Mixing & proportioning
Stepper-motor-driven gear pumps and manifolds for accurate 1K, 2K or 3K fluid delivery, typically on automatic or robotic lines.
Autoquip · Mixing & proportioning
Dual-acting piston dispense pumps used in Autoquip plural-component metering and batch dispense systems.
Autoquip · Tanks, agitators & lifts
Lid-mounted agitator systems for Autoquip mix tanks, driven by the ECO piston air engine.
Autoquip · Tanks, agitators & lifts
Self-lubricating piston air motors and agitator kits built on them for Binks and Graco pressure pots, pail lids and 55-gallon drums.
Autoquip · Tanks, agitators & lifts
Single-post pneumatic elevator that raises the agitator lid off a 5-gallon pail, on a two-pail base for quick change-over.
Autoquip · Tanks, agitators & lifts
Pneumatic single-post elevator that lifts a drum-cover agitator out of a 55-gallon drum for change-out.
Autoquip · Tanks, agitators & lifts
Belt-reduced agitators for 55-gallon drums, driven by an ECO #3 or #7 air engine.
Autoquip · Tanks, agitators & lifts
Lift that raises a pressure pot lid and its agitator so the pot can be refilled without setting the lid on the floor.
Autoquip · Tanks, agitators & lifts
PLC-based tank level monitoring: a non-contact level sensor feeds an HMI control panel with programmable high and low alarms.
Autoquip · Regulators, filters & valves
Air-piloted fluid regulators for automatic spraying with no spring in the fluid section, which cuts trapped paint and flush time.
Autoquip · Regulators, filters & valves
Patented pneumatic control that automatically drops air-pump pressure when a circulation system isn't spraying.
Autoquip · Regulators, filters & valves
Combined pressure and flow regulator with a flow switch that holds an air motor's speed steady as its load changes, such as an agitator in a draining tank.
Autoquip · Regulators, filters & valves
All-pneumatic switch that detects air flow in a spray gun line and returns an air 'gun on' signal, with no electrical devices in the booth.
Autoquip · Gun cleaning & solvent recycling
Air-driven wet-brush units that scrub paint overspray off spray gun air caps and fluid tips between parts. Built in stainless steel for manual or automatic guns.
Autoquip · Gun cleaning & solvent recycling
Spray-jet cleaning station for automatic and robotic guns: solvent and air jets clean the air cap while a venturi vacuum draws off vapors to the waste line.
Autoquip · Gun cleaning & solvent recycling
Enclosure that holds a manual spray gun during color change so it can be flushed hands-free while the waste is captured.
Autoquip · Gun cleaning & solvent recycling
Air-operated solvent saver that blends plant air into the flush solvent to clean color-change lines and applicators with less solvent.
Send a parts list or describe the problem. A finishing specialist will respond within one business day with next steps, pricing and timeline.
Added to RFQ list (0)
